Replacing The Battery; To Replace The Battery; Locating Components - Gateway M-1628 Install Manual

Replacing the Battery

Replacing the Battery
If your notebook is connected to AC power, you can replace the
battery while your notebook is turned on.

Locating Components

Battery
latch
Danger of explosion if the battery is incorrectly replaced.
Replace only with a battery specifically manufactured for your notebook.
Recycle or dispose of the battery as hazardous waste.
The battery used in this device may present a fire or chemical burn hazard
if mishandled. Do not disassemble, heat above 212°F (100°C), or incinerate.
Keep away from children.
Technical Support
See the label on the bottom of the notebook for Customer Care Information. See
your Reference Guide for important safety, regulatory, and legal information.
Battery

To replace the battery:

1 If your notebook is on and is connected to AC power, go to Step 2.
-OR-
If your notebook is on and is not connected to AC power, save your
work and turn off your notebook.
2 Turn your notebook over so the bottom is facing up.
3 Slide the battery lock to the unlocked position, then slide the
battery latch.
Battery
lock
4 Slide the battery out of your notebook.
5 Slide a recharged battery into your notebook until it snaps into
place.
6 Slide the battery lock to the locked position.
7 Turn your notebook over.
8 Open the LCD panel.
© 2008 Gateway, Inc. All rights reserved. Gateway and eMachines are trademarks
or registered trademarks of Gateway, Inc. in the United States and other countries.
All other brands and product names are trademarks or registered trademarks of
their respective companies.
1