Updating Device Drivers - Gateway 400VTX User Manual

Updating device drivers

The Restoration CDs contain a device driver update utility that works over the
Internet. If you do not have an Internet service provider, the update utility
works by direct-dialing the device driver update service.
Important
To update device drivers:
1
Insert the red Gateway CD into the DVD drive. If the program starts
automatically, go to Step 5.
- OR -
If the program does not start automatically, go to Step 2.
2
Click
Start
3
In the
Open
the DVD drive).
4
Click .
OK
5
If this is the first time you have inserted the red Gateway CD, accept the
End User License Agreement (EULA) by clicking
. The Gateway Driver and Application Recovery program starts and
Continue
the
Drivers and Application Recovery
6
Click the
7
Click
Check Now
If your system came equipped with a wireless device, only
use the drivers approved for the country the device will be
used in. See the red Gateway CD or the Gateway
Technical Support Web site (www.gateway.com/support).
If your system came equipped with an internal embedded
wireless device, see "Safety, Regulatory, and Legal
Information" on page 249 for general wireless regulatory
and safety guidelines.To find out if your system has an
internal wireless device, check the label (see "Identifying
your model" on page 10).
, then click . The Run dialog box opens.
Run
text box, type d:\runmenu.exe (where d is the drive letter of
tab.
Web Updates
. The Connect window opens.
www.gateway.com
Yes, I accept it
tab appears.
Updating device drivers
, then clicking
203