Tripp Lite B127A-1A1-BHBH Owner's Manual page 30

Hide thumbs Also See for B127A-1A1-BHBH:

Standard Extender Kit Installation

-03-127-933CC9-EN.indd 30

Make sure all equipment in the installation—such as TVs,

Blu-ray players and the transmitter—is powered OFF.

Using a DisplayPort cable (such as Tripp Lite P580-Series

cables), connect the DisplayPort source to the INPUT port on

the local transmitter unit.

Optional for B127A-111-BDTH: Using an HDMI 2.0 cable

(such as Tripp Lite P569-XXX-CERT or P568-XXX-2A Series

cables), connect a local monitor to the LOCALOUT port on

the B127A-111-BHTH local transmitter unit.

Optional: To extend the transmission distance up to 400

ft. connect a B127A-010-H signal booster between the

transmitter and receiver unit using Cat6 cable.

Note: In a daisy-chain installation the B127A-010-H signal

booster unit must be placed between the transmitter and

first transceiver unit in the chain or else the signal booster

will not function.

Using Cat6 cable, connect the RJ45 port on the local

transmitter unit to the RJ45 port on the remote receiver unit.

Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-

CERT or P568-XXX-2A Series cables), connect the remote

transceiver unit's HDMI port to a monitor.

Turn on the power to your connected TVs/monitors.

3/24/2021 9:38:16 AM