Advertisement
Standard Extender Kit Installation
1.
2.
3.
4.
5.
6.
7.
-03-127-933CC9-EN.indd 21
-03-127-933CC9-EN.indd 21
Make sure all equipment in the installation—such as TVs,
Blu-ray players and the transmitter—is powered OFF.
Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT
or P568-XXX-2A Series cables), connect the HDMI source to
the INPUT port on the local transmitter unit.
Optional for B127A-1A1-BHPH: Using an HDMI 2.0 cable
(such as Tripp Lite P569-XXX-CERT or P568-XXX-2A Series
cables), connect a local monitor to the LOCALOUT port on
the B127A-1A1-BHPH local transmitter unit.
Optional: For extended range, connect a B127A-010-H
signal repeater unit to the transmitter and receiver via
Cat6 cabling. See B127A-010-H product features for more
information.
Using Cat6 cable, connect the RJ45 port on the local
transmitter unit to the RJ45 port on the remote receiver unit.
Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT
or P568-XXX-2A Series cables), connect the remote receiver
unit's HDMI port to a monitor.
Turn on the power to your connected TVs/monitors.
21
3/24/2021 9:38:15 AM
3/24/2021 9:38:15 AM
Advertisement
