Tripp Lite B127A-1A1-BHBH Owner's Manual page 19

Hide thumbs Also See for B127A-1A1-BHBH:

Standard Extender Kit Installation

10. The orange RJ45 LED will illuminate on both the local

-03-127-933CC9-EN.indd 19

Connect the external power supply to either the transmitter

or receiver unit. Plug it into an available wall outlet or a

Tripp Lite surge protector, power distribution unit (PDU) or

uninterruptible power supply (UPS). The POWER (green)

LED on the local transmitter unit will illuminate to indicate

the unit is receiving power from the external power supply.

The POWER (green) LED on the remote receiver unit will

illuminate to indicate the unit is receiving power from the

local transmitter unit through PoC technology.

Turn on the power to the HDMI source.

transmitter and remote receiver units to indicate a signal is

being received from the source to display. The screen should

now display on the connected monitor(s).

3/24/2021 9:38:15 AM