Tripp Lite B127A-1A1-BHBH Owner's Manual page 29

Standard Extender Kit Installation
Notes:
•
Test to ensure the entire installation works properly before pulling
cables through ceilings/walls.
• To achieve maximum distance and performance, use 24 AWG solid
wire Cat6 cable. Using stranded wire Cat6 cable, or cable with a
gauge (AWG) size higher than 24 AWG, will result in shorter extension
distance. Higher-gauge cabling, such as 26 AWG, has a more limited
transmission capability than lower-gauge cabling. All Tripp Lite N202-
Series Cat6 cables are made with 24 AWG solid wire cabling.
• The installation diagram shows a B127A-111-BDTH transmitter and
transceiver with an additional transceiver attached to demonstrate the
kit's daisy-chain capabilities.
• External power is not required for remote receiver units due to Power
over Cable (PoC) technology incorporated in the transmitter units.
B127A-111-BDTH
extender kit
DC 24V, 1A
-03-127-933CC9-EN.indd 29 -03-127-933CC9-EN.indd 29
 Up to 230 ft. (70 m) Cat6 cable at 4K/60Hz
 Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K/60Hz
 Toslink cable
 Up to 15 ft. (4.5 m) DisplayPort cable at 4K/60Hz

DC 24V, 1A
LOCAL INPUT OUTPUT
 

Monitor
Up to 230 ft. (70 m) Up to 230 ft. (70 m)
at 4K/60Hz at 4K/60Hz
DisplayPort
Source
LOCAL / TRANSMITTER

DC 24V, 1A
OUTPUT INPUT OUTPUT


Up to 230 ft. (70 m) Up to 230 ft. (70 m)
at 4K/60Hz at 4K/60Hz
TV
REMOTE / RECEIVER
29
OUTPUT INPUT OUTPUT

TV
3/24/2021 9:38:16 AM 3/24/2021 9:38:16 AM