Advertisement
Step 13 — Installing the Door Handles and Riser Rail
Locate all three door handles and unscrew the knobs on the
rear of the handle to separate the parts. Align with the pre-
drilled holes in the glass and reconnect the handle parts.
Ensure you have a rubber washer on either side to protect the
glass.
www.insigniashowers.com
Last Modified: 31/01/2022
Locate the riser rail and remove the top
and bottom sections by sliding them up
or down respectively. Screw the riser rail
to the back panel and replace the top
and bottom sections.
19
Advertisement
