Sharp SF-A57 Service Manual page 3

Included parts
ADF tray
ADF mounting screws ADF securing screws
(2 pcs.)
Right cover
(1 pc.)
Unplug the copier and follow the procedure below.
1. Remove the document cover.
Open the document cover and lift it at a slight backward angle to
remove it.
Insert the left and right covers (included parts) into the holes from
which the document cover has been removed.
Document cover
Right cover
Tray securing screws
(2 pcs.) (2 pcs.)
Left cover
(1 pc.)
Left cover
2. Mount the ADF onto the copier.
Remove the two cut-outs from the rear part of the upper cover of the
copier.
Install the two ADF mounting screws.
Fit the ADF mounting screws into the holes in the hinges of the ADF
and secure the ADF with the two ADF securing screws.
ADF securing screws
ADF mounting screw
ADF securing screw
– 2 –
Cut-outs
Rear part of
upper cover
ADF mounting screws