7 ] Connector Layout - Sharp SF-A57 Service Manual

[Note for assembly]
1
When installing the original transport belt, put the right and left in
parallel, and allow the same clearance between the spacer and
the belt in the front side and in the rear side.
Spacer
Belt unit
Spacer
2
Check that the original transport belt is not on the belt guide.
Transport belt
Belt guide
Spacer
Spacer
Belt guide
Transport belt
– 18 –
[7] CONNECTOR LAYOUT
1. Control PWB peripheral
ASM-RU
ASM-drive R
ASM-DC
ASM-drive IF
Control PWB
ASM-TR1
Control PWB
ASM-IF
Control Pwb
ASM-IF
ASM-TR1
ASM-SNR
ASM-sensor IF
Transport motor
ASM-SNR
(DTM)
ASM-LED
ASM-sensor IF
ASM-drive IF