Changing Tubing And Domes; Attach Thin Tubing - MDHearingAid VOLT User Manual

Changing Tubing and Domes

1: Attach Thin Tubing to VOLT *
a) Hold top of Thin Tubing Base and twist
VOLT Body clockwise to remove tubing
that came on aid.
b) Twist VOLT Body counter-clockwise, while
gently pushing the new Thin Tubing Base
onto threaded end of VOLT Body.
c) The Thin Tubing Base aligns with the
wide sides of VOLT Body when you
are finished.
Please note: Thin Tubing is ear specific.
Red (2B) for
Blue (2B)
*The Thin Tubing has been attached for your convenience.
9
Right ear use and
is for Left.
a)
b)
c)