Basic Operation; Turning On And Off The Tv; First Time Setup - Tesla 3 Series Quick Start Manual

ENG

BASIC OPERATION

Turning on and off the TV

Turn on the TV
Connect the TV to your mains socket.
If TV has a power switch, turn it on firstly. In standby mode, press
turn on the TV.
Turn off the TV
Press the button on the remote control to enter standby mode.
Do not leave your TV in standby mode for long periods of time. It is best to unplug the power cord.
NOTE:
If there is an accident power off, the TV will be in standby mode automatically after re-supply the
power. To ensure the normal use of the TV, the frequent turning on and off is forbidden, when there is
an accident power off, it is recommended to unplug the power cable from the power socket.

First Time Setup

If this is the first time you run the TV, the Initial Setup Menu will appear in the picture, and the items of
this menu also exist in other menus, so you are able to change the values after you set them up.
Tips: Make sure that the antenna connection is made.
Set you desired language
Press buttons to select the language to be used for menus and message.
 /
Select your country
Press the buttons to select the country you are living in, and then press the
 /
Select your time zone.
Press the buttons to select a time zone, and then press the
 /
Select your TV environment.
Press the buttons to select the Home Mode or Store Mode and then press the
 /
Home is the recommended setting to produce the best energy efficiency. If you want to set Store
Mode, a message appears asking you to confirm your choice.
Select the antenna type (Air or Cable).
Press the buttons to select the tuning modes and then press the
 /
information, please refer to Channel menu
Auto Tuning
Press the button to start the auto searching.

First tuning DTV, press Menu and left arrow button to skip DTV tuning,
Second tuning ATV, press Menu and left arrow button to skip ATV tuning.
NOTE:
• If the TV doesn't receive any channels, please check your aerial connection or the country you
selected, and then try an auto search again.
• If the TV just receives some of the channels, it means the aerial's reception isn't good enough and
an antenna service is recommended.
Auto Tuning).

8
Power button on the remote to
button.

button.


button. (For more detailed

button.