Getting Started; Using The Remote Control; Installing Batteries In The Remote Control - Tesla 3 Series Quick Start Manual

ENG
NOTE:
• Disposal of this product must be carried out in accordance to the regulations of your local authority. Do not
dispose of this product with general household waste disposal.
• Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note
that this does not affect the performance of your product.
• Avoid touching the screen or holding your finger(s) against it for long periods of time. Doing so may produce
some temporary distortion effect on the screen.
• It is not recommended to keep a certain still image displayed on the screen for a long time as well as displaying
extremely bright images on screen, reduce the 'brightness' and 'contrast' when displaying still images.

GETTING STARTED

Connection Installation
Before the installation and use, please read
carefully the relevant content in "Warning and
Safety instructions".
HDMI: Support AV devices with an HDMI
connector (such as set top box, DVD player,
digital TV set, etc.).HDMI is also called as high
definition multimedia interface, and it can
transmit digital audio and video signal with one
cable.
NOTE:
• HDMI 1 (supports ARC function)
ARC: (Audio Return Channel) Adopted in TV
output of digital audio, can be connected to the
device supporting ARC, transmit the TV sound to
the device.
ANT: Used to connect the antenna and receive
signals of the external antenna.
AV: Connect an AV device that has composite
video jacks, such as a VCR or a DVD player
NOTE:
• If AV works as mini terminal, and shared same
audio, Please choose to use a one-to-three
audio & video cable
COMMON INTERFACE: Please insert CI card

Using the Remote Control

When using the remote control, aim it at remote sensor on the television. If there is an object
between the remote control and the remote sensor on the unit, the unit may not operate.
• Point the remote control at the REMOTE SENSOR located on the television.
• When using this television in a very brightly lit area, the infrared REMOTE CONTROL SENSOR may
not work properly.
• The recommended effective distance for using the remote control is about 7 meters.

Installing Batteries in the Remote Control

1. Open the cover at the back of the remote control.
2. Install two AAA size batteries. Make sure to match the "+" and "-" ends of the
batteries with the diagram inside the compartment.
3. Replace the cover.
into the COMMON INTERFACE slot according to
the arrow on the CI card.
DIGITAL AUDIO OUT: Sending the TV's digital
audio signal to external audio equipment via the
Digital Audio Output port.
USB: Connect a USB Storage device and
multimedia file playback.
: Short press to turn on the TV, then short press
to open the Source Menu;
Long press to turn off the TV.
NOTE:
• The range of power input for the TV is 100-
240V~ 50/60Hz; Do not connect the TV
power input port with the power cable out of
the above range.
• Before connecting to an external device,
please firstly make sure that the TV set and
the external device have been turned off.
When connecting, please make reference to
the interface name and the interface color to
connect the signal cable.
• Please hold the insulated part of the plug
when you are unplugging the power cable, do
not touch directly the metallic part of the cable.
6