Viessmann VITOCELL 100-E Installation And Service Instructions Manual page 13

Type SVPA 400 l: Fitting the thermal insulation
6x
2.
4.
6x
Fig. 9
Note
2 people are required for the following work.
1. At the back of the cylinder: Attach 6 clip fasteners
to the edges of the right and left sections of the
insulation jacket and place the thermal insulation
jacket around the cylinder body.
Note
Leave the clip fasteners in the first notch.
6x
1.
3.
6x
(cont.)
2. At the front of the cylinder: Attach 6 clip fasteners to
the edges of the right and left sections of the ther-
mal insulation jacket.
3. Push the clip fasteners at the back of the cylinder
as close together as they will go.
4. Push the clip fasteners at the front of the cylinder
as close together as they will go.
Installation sequence
13