Connecting The Equipotential Bonding; Type Svpa 400 L: Fitting The Thermal Insulation; Fitting The Lower Thermal Insulation Mat; Fitting The Thermal Insulation On The Vitocell Without Vitotrans - Viessmann VITOCELL 100-E Installation And Service Instructions Manual

Installation sequence

Connecting the equipotential bonding

Connect the equipotential bonding in accordance with
the requirements stipulated by your local power supply
utility and VDE [or local] regulations.

Type SVPA 400 l: Fitting the thermal insulation

Fitting the lower thermal insulation mat

1.
Fig. 8
!
Please note
The thermal insulation must not come into con-
tact with naked flames.
Exercise caution when welding and brazing.

Fitting the thermal insulation on the Vitocell without Vitotrans

Note
Ensure that no fleece remnants enter the heating
water buffer cylinder through the cylinder connections.
12
Carry out the equipotential bonding in accordance
c
with the technical requirements stipulated by the local
power supply utility and SEV regulations.
2.