Ferris SNAPPER PRO FAST-Vac Operator's Manual page 28

Installation
(IS500Z & IS1500Z Series)
(S50X & S150X Series)
1. Install the weight carrier (A, Figure 36) onto the
front of the unit and secure with the 1/2-20 x
1-1/4" bolts (B), 1/2" washers (C) and 1/2-20 nylon
lock nuts (D).
2. Install the counter weights (E) in the weight carrier
and secure with the retaining pin (F) and hairpin
clips (G).
(IS2000Z Series)
1. Install the weight carrier (A, Figure 37) onto
the front of the unit and secure with the 3/8-16
x 1-1/4" bolts (B), 3/8" washers (C) and 3/8-16"
nylock flange nuts (G).
2. Install the counter weights (D) in the weight carrier
and secure with the retaining pin (E) and hairpin
clips (F).
26
A
C
E
B
Figure 36. Install Weight Carrier
A. Weight Carrier
B. 1/2-20 x 1-1/4" Bolt
C. 1/2" SAE Washer
D. 1/2-20 Nylon Lock Nut
E. Weight
F. Retaining Pin
G. Hairpin Clip
A
C
B
D
E
Figure 37. Install Weight Carrier
A. Weight Carrier
B. 3/8" SAE Washer
C. 3/8-16X1-1/4" Bolt
D. Weight
E. Retaining Pin
F. Hairpin Clip
G. 3/8-16 Nylock Flange Nut
A. Lower Clamp (with knob)
www.ferrismowers.com | www.snapperpro.com
D
F
G
G
F