Table of Contents
Advertisement
Install Hose
1. Lower the mower deck to the lowest cutting
position.
2. Install the hose (A, Figure 33) onto the blower
and secure with the removable clamp (with knob)
(B). At least two bands must cover the outlet of
the blower (C).
3. Cut the hose to fit properly between the blower
and collector as shown in Figure 33. At least two
bands must cover the inlet of the collector (D).
Secure with the stationary clamp (E).
A
B
Figure 33. Install Hose
A. Hose
B. Removable Clamp (with knob)
C. Blower Outlet
D. Collector Inlet
E. Stationary Clamp
A
C
A
Installation
E
D
23
Advertisement
Table of Contents
