Table of Contents
Advertisement
Installation
Reinstall the Spindle Belt
Refer to "Remove the Spindle Belt" on page
14 and reverse the order for reinstalling the
belt.
Install the Deck Guard
1. Install the new deck guard onto the mower deck
and secure with the hardware previously removed
(see Figure 18).
NOTE: The IS2000Z with 52" deck has a 2-piece
deck guard. Install as shown in Figure 19.
Blower Installation
Install the Blower
1. Install the blower onto the mower deck. Refer
to Figure 20 for the position of the quick pins in
relationship to the chute mount bracket on the
mower deck. The quick pins fit into the same
holes that the chute mount rod was installed.
16
Figure 18. Install Guard
Figure 19. Install Guard - IS2000Z with 52" Deck
Old Style Mounts
New Style Mounts
Figure 20. Install Blower On Deck (Notice Pin
Orientation)
www.ferrismowers.com | www.snapperpro.com
Advertisement
Table of Contents
