Table of Contents
Advertisement
Setting Up the Devices
Charging the Battery Pack in the Battery Charger
To charge the battery pack in the Battery Charger, follow these steps:
1. Turn on the Battery Charger. For procedures, refer to
2. Slide the battery pack into the Battery Charger, making sure that the charging
! Important: Battery packs should not be stored in a fully charged state for an extended
period. Storing fully charged battery packs may reduce battery capacity and service life.
Battery Charger Status Indicator
The following table provides charging status indications when the battery pack is
charged using the Battery Charger. One LED is assigned for each charging slot.
LED Behavior
Solid Orange
Off
Flashing at 1 Hz
on the previous page.
contacts on the battery properly connects with the charging contacts on the Battery
Charger.
When the battery pack is placed in the Battery Charger, the battery pack starts to
charge. The charging status is indicated through the Charging Status LED
designated for each charging slot. For more information on the handheld charging
status, refer to
Handheld Charging Status Indicator
Description
The battery is charging.
•
Standard mode—the battery is fully charged at 100%.
•
Maintenance mode—the battery is 70% charged.
The battery is not charging due to an error.
Setting Up the Battery Charger
on page 14.
2-32
Advertisement
Table of Contents
