Cleaning The Side Brushes - Miele HS18 Operating Instructions Manual

The exhaust filter compartment is
located in the dust box.
 Remove the lid from the dust box.
 Fold out the filter unit from the dust
box.
 Remove the pre-filter and clean it as
required using the cleaning tool.
 Unlatch the exhaust filter, remove it
and clean it using the cleaning tool.
 Refit the exhaust filter into the cover.
 Place the pre-filter onto the exhaust
filter.
The filter unit is complete.
 Carefully refit the filter unit and clip it
into position.
The exhaust filter must be replaced
with a new one after approx. six
months in order to achieve the best
possible cleaning results.

Cleaning the side brushes

Clean the side brushes as required. For
this you will require the cleaning tool
which is located at the top of the dust
box lid.
 Place the robot vacuum cleaner
upside down on a level, clean
surface.
 Using both hands take hold of two
opposite elastic side brush holders
and pull them upwards to remove
them.
 Remove threads and hair using the
wiper which is located on the bottom
of the cleaning tool.
 Hold the wiper over a bin.
 Press the button at the top of the
wiper several times until all threads
and hair have fallen out.
 Press the two cleaned side brushes
carefully onto their pins until they
audibly engage. Take care to comply
with the markings L and R.
25