Cleaning The Side Brushes - Miele HS18 Operating Instructions Manual

en
 Fold out the filter unit from the dust
box.
 Remove the pre-filter and clean it as
required using the cleaning tool.
 Release the exhaust filter and clean it
using the cleaning tool.
 Refit the exhaust filter into the cover.
 Place the pre-filter onto the exhaust
filter.
The filter unit is complete.
 Carefully refit the filter unit on the
dust box and clip the filter unit into
position.
The exhaust filter must be replaced
with a new one after approx.
6 months in order to achieve the best
possible cleaning results.

Cleaning the side brushes

Clean the side brushes as required. For
this you will require the cleaning tool
which is located at the top of the dust
box lid.
 Place the robot vacuum cleaner up-
side down on a level, clean surface.
68
 20-arm universal side brushes: take
hold of opposing side brushes (one
long and one short bunch per hand)
and pull them upwards to remove
them.
 6-arm carpet side brushes: take hold
of opposing elastic side brush hold-
ers (one holder per hand) and pull
them upwards to remove them.
 Remove threads and hair using the
wiper which is located on the bottom
of the cleaning tool.
 Hold the wiper over a bin.
 Press the button at the top of the
wiper several times until all threads
and hair have fallen out.