Activating The Timer / Displaying A Set Start Time; Deactivating The Acoustic Signals; Reducing The Maximum Crossing Over Height; Maintenance - Miele HS18 Operating Instructions Manual

Activating the timer / displaying a set
start time
 Press the Timer button on the remote
control briefly.
The timer  indicator lights up in the
display and the set start time is shown
briefly in the indicator field. The robot
vacuum cleaner will start to vacuum at
the set time.

Deactivating the acoustic signals

Acoustic signals are set as standard.
You can deactivate and then reactivate
them.
 Press the Mute button on the remote
control briefly.
OFF will appear in the indicator field
briefly.
Acoustic signals for error messages
cannot be deactivated.
Reducing the maximum crossing
over height
The robot vacuum cleaner is set to
overcome height differences of up to
17 mm as standard. It is therefore able
to vacuum carpets, move over door
thresholds, etc.
If you would like to reduce this height
(down to approx. 6 mm) in order to
protect the legs of chairs, tables or
lamps, for example, you can deactivate
the factory default setting.
 Press the Climb button on the remote
control briefly.
LO will appear in the indicator field.
Press the Climb button again briefly if
you want to reactivate the maximum
crossing over height of 17 mm. HI will
appear in the indicator field.

Maintenance


Switch the robot vacuum cleaner
off before doing any maintenance
work. To switch it off, press the I/0
switch on the side of the robot
vacuum cleaner to the 0 position.
We recommend using only genuine
Miele accessories bearing the
„ORIGINAL Miele" logo on the
packaging. Only these will guarantee
the optimum performance of your
robot vacuum cleaner and the best
possible cleaning results.
Purchasing accessories
Original Miele accessories are available
from the Miele Webshop, Miele Service
and your Miele supplier.
Original Miele accessories are identified
by the "ORIGINAL Miele" logo on the
packaging.
23