Storage/Factory Default Settings; Cleaning And Care - Miele HS18 Operating Instructions Manual

 Store the plug connection in the slot
at the side.
 Carefully refit the cover of the
rechargeable battery compartment
and close it, making sure it clicks into
place.
 Observe the special instructions
regarding the handling and disposal
of the old rechargeable battery found
in the sections „Warning and Safety"
and „Caring for the environment" at
the beginning of these operating
instructions.
Storage/Factory default
settings
Storage

Switch the robot vacuum cleaner
off if it is not going to be used for a
long period of time. To switch it off,
press the I/0 switch on the side of
the robot vacuum cleaner to the 0
position.
If the robot vacuum cleaner is not going
to be used for a long period of time,
make sure it is stored in a well
ventilated, cool place.
For optimum care, store the robot
vacuum cleaner at half charge
capacity (rechargeable battery status
indicator in the display is orange).
Factory default settings
The robot vacuum cleaner can be reset
to its factory default settings. Have the
remote control to hand.
 Press and hold the Spot and Turbo
sensors on the display for at least 5
seconds at the same time.
r:St will appear in the display.
 Within the next 2 seconds press the
OK button on the remote control.
F:tr will appear in the display.
The robot vacuum cleaner will start
again with its factory default settings
restored.

Cleaning and care

Caring for your robot vacuum cleaner
and its accessories
29