Cleaning The Dust Box Seals; Replacing The Dust Box Seal Unit; Cleaning The Front Wheel; Cleaning The Sensors - Miele HS18 Operating Instructions Manual

 Refit both side brushes, see previous
description „Cleaning the side
brushes".
In order to continue to achieve the
best possible cleaning results,
replace the roller brush with a new
one after approx. one year.

Cleaning the dust box seals

Clean the seals on the bottom of the
dust box as required.
 Place the robot vacuum cleaner
upside down on a level, clean
surface.
 Wipe the seals with a damp cloth to
clean them.
In order to continue to achieve the
best possible cleaning results,
replace the seal unit with a new one
after approx. one year.

Replacing the dust box seal unit

 Remove the dust box.
 Unlatch the seal unit from the
underside of the dust box so that the
arrow points to the  symbol.
 Remove the seal unit.
 Insert the new seal unit so that the
arrow points to the  symbol.
 Lock the seal unit, making sure it
clicks into position.
The arrow points to the  symbol.

Cleaning the front wheel

Clean the front wheel as required. For
this you will require the cleaning tool
which is located at the top of the dust
box lid.
 Place the robot vacuum cleaner
upside down on a level, clean
surface.
 Unclip the cover.
 Remove the front wheel.
 Remove any threads and hair and
clean the front wheel, the cover and
the slot depression using the cleaning
tool.
 Refit the front wheel and close the
cover making sure it clicks into
position.

Cleaning the sensors

Clean the sensors as required.
27