Maintenance; Purchasing Accessories; Filter System; Activating The Comfortclean Function - Miele Triflex HX2 Operating Instructions Manual

 Swing the vacuum cleaner forwards
until the Electrobrush connector
audibly clicks into place.
The vacuum cleaner stays securely
upright, the Electrobrush switches itself
off and the battery is conserved.
If you then unlock the connector on the
Electrobrush, the Electrobrush will
switch on again.

Maintenance

Risk of injury caused by rotating

roller brush.
You can injure yourself on the
rotating roller brush.
Switch the vacuum cleaner off before
doing any maintenance work. Use
the On/Off switch on the Comfort
handle to do this.
It is recommended to use only genuine
Miele accessories bearing the
"ORIGINAL Miele" logo on the
packaging. Only these will guarantee
the optimum performance of your
vacuum cleaner and the best possible
cleaning results.
Please note that faults and damage
caused by use of accessories which
do not bear the "ORIGINAL Miele"
logo on the packaging are not covered
by the vacuum cleaner warranty.

Purchasing accessories

Original Miele accessories are available
from the Miele web store, Miele Service,
and your Miele dealer.
Original Miele accessories are identified
by the "ORIGINAL Miele" logo on the
packaging.
With 3D4U, Miele also offers free
accessories to download for your 3D
printer (www.miele.ca > Customer
Support > Spare parts & accessories
> 3D4U – 3D printing instructions).
Filter system (Fig. 32)
 Fine dust filter (HX FSF-2)
 Pre-filter
 Dust container
d Dust container flap

Activating the ComfortClean function

(Fig. 33)
Always run the interim cleaning function
for the fine dust filter before emptying
the dust container. You should also run
it whenever the suction power begins to
drop.
This enables the vacuum cleaner to
achieve the very best cleaning
performance again right away.
en-CA
63