eMachines emonster Series User Manual page 65

3. Move the screwdriver up and down until the slot cover breaks away from the chassis. Then lift
the slot cover out of the chassis.
4. Adjust any switches or jumpers on the expansion card, if necessary. When you handle the card,
be careful not to touch any components on the circuit board or the gold-edged connector.
5. Hold the card along the top corners and guide it into the connector. When the expansion card
connector reaches the connector on the mianboard, push the card in firmly to insert it fully.
......................................................................................................................................................................................................................................
6-2
Installing and Removing Board Options and Drives
.........................................................................................................................................
Slot cover