eMachines emonster Series User Manual page 46

.........................................................................................................................................
Advanced Chipset Control Submenu
This submenu is for the configuring the advanced chipset.
Feature
Default Primary
Video Adapter
AC'97 Audio
I/O Device Configuration Submenu
This submenu is for the configuring the I/O devices.
Feature
Serial port A
Base I/O address
Interrupt
Parallel port
Mode
Base I/O address
Interrupt
Floppy disk controller
......................................................................................................................................................................................................................................
Options Description
• PCI This option lets you define the type of your video adapter you are
• AGP using for your primary display.
• Disabled Select Disabled, if you don't want use AC'97 audio.
• Enabled
Options Description
• Disabled Configures serial port.
• Enabled If you select Enabled, you must assign the address and interrupt.
• 3F8 Selects the base I/O address for serial port.
• 2F8
• 3E8
• 2E8
• IRQ 3 Selects the interrupt for the serial port.
• IRQ 4
• Disabled Configures the parallel port.
• Enabled
• SPP Selects the mode for the parallel port.
• EPP
• ECP
• 378 Selects the base I/O address for parallel port.
• 278
• 3BC
• IRQ 5 Selects the interrupt for the parallel port.
• IRQ 7
• Disabled Configures the floppy disk controller.
• Enabled
Using the BIOS Setup Program
4-7