Table of Contents
Advertisement
10 CombiZone
You can use this function to link the two left-hand cook-
ing zones, which are the same size. When doing this,
the same heat setting is set for both cooking zones.
This is intended in particular for cooking with long
cookware.
10.1 Information on using the cookware
For best results, use cookware that matches the size of
the two cooking zones. Place the cookware in the
centre of the cooking zones.
Note: If you are using only one item of cookware on
one of the two cooking zones, you can move it to the
second cooking zone. In this case, the power level and
the selected settings are transferred.
11 Move function
You can use this function to link the two left-hand cook-
ing zones, which are the same size, and select a differ-
ent power level for both.
Preset power levels:
¡ Front cooking zone = Power level
¡ Rear cooking zone = Power level .
You can change the power levels for each cooking
zone independently of each other.
Notes
¡ Only use one of the cooking zones. If both cooking
zones are used at the same time, the function is not
activated.
¡ The power setting lights up less brightly in the dis-
play for the cooking zone on which there is no cook-
ware. The power level is not activated until you
move the cookware to this cooking zone or the
cookware is detected.
¡ If the function is activated and a second piece of
cookware is placed on the free cooking zone, the
display lights up less brightly, but the cooking zone
is not active. The cooking zone is activated when
you remove the first item of cookware.
10.2 Activating the CombiZone function
Requirement: The hob must be switched on.
Select one of the two cooking zones in the Com-
1.
biZone and set the power level.
Touch
. The display lights up.
2.
a The power level appears in the display for the lower
cooking zone.
a The function has now been activated.
10.3 Changing the power level
Select one of the two cooking zones assigned to the
1.
CombiZone function.
Change the power level in the settings area.
2.
10.4 Deactivating the CombiZone function
Select one of the two cooking zones assigned to the
1.
CombiZone function.
Touch .
2.
a The function has now been deactivated.
a The two cooking zones now operate independently
of one another.
11.1 Information on using the cookware
In order to guarantee good thermal detection and heat
distribution, position the cookware in the centre.
Only use one item of cookware that only covers one of
the cooking zones:
Move the cookware from one cooking zone to another:
11.2 Activating the move function
Combine the two cooking zones that have different
power levels.
Select one of the two cooking zones that belong to
1.
the move function.
Touch
. The display lights up.
2.
a The power level lights up in the displays for the two
cooking zones.
a The move function has now been activated.
CombiZone en
19
Advertisement
Table of Contents
