Installation - STEINEL Spot Way Manual

Way spot package contents (Fig. 3.1)
– Light including pillar, ground plate and power cord cable with mains plug
– Three screws
– Three ground plugs
Garden spot package contents (Fig. 3.2)
– Light including power cord cable with mains plug
– Ground spike
– Two screws
Spot Way product dimensions (Fig. 3.3)
Spot Garden product dimensions (Fig. 3.4)
Product parts (Fig. 3.5 – 3.10)
A Light enclosure
B Motion sensor (Spot Way / Spot Garden SC only)
Light-level sensor (Spot Way / Garden NightAuto only)
C
D Twilight setting (Spot Way / Garden NightAuto only)
E Pillar with ground plate (Spot Way only)
F Ground spike (Spot Garden only)
G Mains power cord with plug
Detection zone for Spot Way / Spot Garden SC (Fig. 3.11 – 3.16)
Luminous intensity distribution (Fig. 3.17)

4. Installation

• Check all components for damage.
• Do not use the product if it is damaged.
• This light's external, flexible cord cannot be replaced.
If the cord gets damaged, the entire light must be replaced.
• When installing the light, make sure the installation site is not subject to vibration.
• Select an appropriate mounting location, taking the reach and motion detection
into consideration.
Spot Way / Spot Garden SC only:
The most reliable way to detect movement is given by mounting the light to point
across the direction in which people walk and by making sure no obstacles (e.g.
trees, walls etc.) interrupt the line of sensor vision.
– 21 –