Table of Contents
Advertisement
Available languages
Available languages
If the motor is overloaded through application of excessive working pressure,
the product's performance drops noticeably or it might stall completely.
If the power tool stalls or slows significantly due to overloading, release the
pressure applied to the product and then allow it to run under no load for
approx. 30 seconds.
3.5 Items supplied
Cut-out tool, depth gauge, three collets (1/8", 5/32", 1/4"), clamping nut,
vacuum cleaner hose connector, hex wrench, operating instructions.
Other system products approved for use with this product can be found at
your local Hilti Store or at: www.hilti.group
3.6 Accessory tools
The following bits can be used with the cut-out tool:
Drywall
•
Guidepoint bit (1/8")
•
Standard bit (1/8")
•
Universal guidepoint bit (5/32")
•
Window/door guidepoint bit (1/4")
Metal
•
Metal bit (5/32")
4
Technical data
4.1 Cut-out tool
Rated speed under no load
Operating temperature
Storage temperature
Weight without battery
Clamping nut
Collet diameter
Cutting bit shank diameter
4.2 Battery
Battery operating voltage
Weight, battery
*2264442*
2264442
30,000 /min
−17 ℃ ... 60 ℃
(1 ℉ ... 140 ℉)
−20 ℃ ... 70 ℃
(−4 ℉ ... 158 ℉)
1.4 kg
(3.1 lb)
/
" external
5
8
hexagon
1/8", 5/32", 1/4"
1/8", 5/32", 1/4"
21.6 V
See the end of
these operating
instructions
English
11
Advertisement
Table of Contents
