ORIGINAL OPERATING INSTRUCTIONS SMD 50 magazine 1 These numbers refer to the corresponding illustra- It is essential that the operating instructions tions. The illustrations can be found on the fold-out cover are read before the tool is operated for the pages.
The magazine is suitable for use with any special hazards that may be encountered. The power the Hilti SF 4000 / SF 4000‑A / SD 2500 / SD 4500 tool and its ancillary equipment may present hazards / SD 5000 / SD 5000‑A22 / SD 4500‑A18 and SD 45 when used incorrectly by untrained personnel or when screwdrivers.
7 Before use Fit the bit into the screwdriver. 7.1 Fitting the magazine to the screwdriver 3 NOTE The bit clicks into position. CAUTION Push the magazine onto the screwdriver in the de- Disconnect the screwdriver’s supply cord from the elec- sired working position until it is heard to engage.
10 Disposal Most of the materials from which Hilti tools or appliances are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for taking back old tools and appliances for recycling. Ask Hilti customer service or your Hilti representative for further information.