Editing Meter Properties - GE AquaTrans AT868 User Manual

Editing Meter Properties

PanaView™ for IDM-Compatible Meters (916-086B)
Through PanaView™, you can edit the properties of your IDM-
compatible flowmeter. You can:
•
Set the meter clock, or synchronize it with the PC clock
•
Read, plot and save transducer signals
•
Clear totalizers
•
Save site files to the meter or PC
•
Clear sites from the meter
•
Print site files to the PC
To edit the properties of your IDM-compatible meter:
1. Highlight the meter (as shown in Figure F-6 on page F-6).
2. Open the "Edit" menu and select the "Properties" option, as
shown in Figure F-8 below.
Figure F-8: The Properties Option in the Edit Menu
September 2004
F-7