Pipe Material - GE AquaTrans AT868 User Manual

Pipe Material

Programming Site Data
If a standard clamp-on transducer is being used, the programming
sequence should be rejoined here.
]
1. Press [ and [ ] to select the pipe material and press [ENTER].
Some of the pipe materials require additional selections. See a
complete list of choices in Table 2-1 below.
Table 2-1: Pipe Material Choices
Material
Carbon
STEEL
Stainless Steel
Ductile
IRON
Cast
Cu (Copper)
no additional selection required
Al (Aluminum)
no additional selection required
BRASS
no additional selection required
CuNi
70% Cu 30% Ni
(Copper Nickel)
90% Cu 10% Ni
Pyrex
GLASS
Heavy silicate flint
Light borate crown
Nylon
Polyethylene
Plastic
Polypropylene
PVC, CPVC
Acrylic
Enter the sound speed of the pipe material by
using the arrow keys. Press [
move the cursor to desired location and press
OTHER
[ ] and [ ]
number and press [ENTER]. If the sound speed
is unknown, refer to the Sound Speeds and
Pipe Size Data manual (914-004).
September 2004
Types
]
and [ ] to
to increase or decrease the
2-7