Touch-Tone; Intercom; Custopak Selectable Standard Features - Verizon CENTREX CUSTOPAK Manual

Table of Contents

TOUCH-TONE

Touch-Tone provides the ability to push-button dial by using tone-

signaling telephones. It is required to operate your

CustoPAK service.

The Intercom feature allows you to speak with another person

within your CustoPAK system without incurring local usage charges.

Use the CustoPAK Intercom in conjunction with other CustoPAK

features, e.g. Call Transfer and Three-Way Calling for calls within

your company. The Intercom is associated with the telephone

lines and is activated by dialing preassigned codes, which are

preprogrammed by Verizon. See the Appendix in the back of this

guide for the Intercom Code Chart for your switch type.

To use this feature:

Pick up the handset.

Listen for dial tone.

Press the intercom code.

The features listed in this section are available for each of your

CustoPAK lines at no additional monthly charge. You may select

as many or as few of these features as you like, giving you the

flexibility to customize each individual CustoPAK line in the manner

which best suits your business. However, some features are not

available for certain switch types. As you read through this section,

be aware of your switch type (found on the front cover of this guide)

and use the grid to the left of each feature to see if it is available

for your CustoPAK system. To add or change features at any time

after your initial installation, contact your Verizon representa- tive.

Please refer to the Important Numbers section on pages 43-45.

Table of Contents

Table of Contents