Traveling - UniCarriers FD160-2 Operation & Maintenance Manual

TRAVELING

Do not operate the lift truck until preoperational
checks are finished
If any defect is found during checking, report it to the supervisor
and have it repaired.
Do not operate the truck until the malfunction or damage is
properly repaired.
Mount properly
Never mount or dismount a moving truck. When mounting or
dismounting the truck, use proper procedures, make sure the
truck is at a complete stop. Support your body using the steps and
hand grips properly. Keep the steps always clean.
When starting the engine Engine-powered trucks
When starting the engine, make sure to:
1) Apply the parking brake securely.
2) Place the direction shift lever and speed range shift lever into
neutral.
3) Adjust the steering column angle and driver's seat position
before starting the engine.
Do not try to adjust them during operation; otherwise a serious
accident might occur.
After adjustment, make sure they are securely locked.
4) Seat yourself in the operator's seat and fasten the seat belt.
5) Press the clutch pedal (trucks with clutch) or brake pedal
(trucks with torque converter).
6) Make sure there is no one under or around the truck, and start
the engine.
1-17
Caution to be taken when starting the electric truck
Electric trucks
Before trying to start the truck (before turning the key switch to
ON), follow the procedure given below:
1) Apply the parking brake.
2) Place the direction shift lever in neutral.
3) Adjust the steering wheel and operator's seat before turning
the key switch ON. Do not try to adjust them during operation;
otherwise a serious accident might occur.
After adjustment, make sure they are securely locked.
4) Seat yourself in the operator's seat and fasten the seat belt.
5) Press the brake pedal.
6) Make sure there is no one under or around the truck, and turn
the key switch to ON.
Do not move controls unless properly seated
Do not operate the controls (levers and pedals) unless you are
properly seated.