UniCarriers FD160-2 Operation & Maintenance Manual page 121

■ LUBRICATING LIFT CHAIN
Apply engine oil to the lift chains using an oiler or brush. To
allow oil to enter between each pin and link plate of the lift chain,
observe the following conditions:
1) Loosen the chain sufficiently.
2) After applying engine oil, move the mast up and down at least
10 times.
NOTE
If your lift truck is used near a port or coastal area, the lift
chains might be damaged from salty breezes. After a storm
or typhoon, it is advisable to wash them with water before
lubricating in the above manner.
PERIODIC INSPECTION
4-22