Periodical Replacement Of Safety Parts - UniCarriers FD160-2 Operation & Maintenance Manual

PERIODICAL REPLACEMENT OF SAFETY
PARTS
In order to perform safe operation, the importance of preventive
maintenance of the truck cannot be overemphasized. Especially,
the parts listed in the table below must be replaced periodically
since they are the most important parts for safety of the truck and
operator.
Moreover these safety parts are liable to be damaged and
deteriorated in the course of time, and it is difficult to determine by
ordinary maintenance whether they are beyond their respective
service limits or not. The safety parts must be replaced with new
ones when their respective service limits have been reached,
even if their appearances are good.
NOTE
The safety parts are, however, not the objects of warranty
claim.
PERIODIC INSPECTION
Name of safety parts
Master cylinder and wheel cylinder
1
cups and dust seals
2 Brake booster rubber parts
3 Brake hose
4 Brake vacuum hose
5 Power steering hose
6 Tank tubing
7 Fuel hose
8 Torque converter rubber hose
Rubber parts inside power steering
9
unit
10 Lift chain
11 Load handling system hose
Recommended
replacement interval
(year)
1
1
1 – 2
1 – 2
2
2 – 4
2 – 4
2
2
2 – 4
1 – 2
4-20