Initial Operation - Prior To First Use - Tchibo Esperto Pro Original Instructions For Use And Warranty

Initial operation – prior to first use
1. Set up the machine...
... on a level worktop or surface that is not sensitive to moisture.
... close to a wall socket. The length of the connection cable
is approx. 80 cm.
... at a distance of at least 1 m away from hot, flammable
surfaces (hobs, ovens, radiators, etc.).
... at least 150 mm away from walls.
The figure above shows the space required for machine
operation when the drip tray and drip grid are in place.
Pay attention to this when selecting the installation location
for the machine.
106466 en Esperto_Pro_v5.indd 47
47
2. Push the drip tray and
drip grid all the way into
the machine as illustrated.
The drip tray is held in
place by magnets.
3. Insert the stainless steel wand
into the silicone tube of the
milk froth rotary control.
4. Open the cover cap on the
coffee/milk spout.
5. Insert the milk froth rotary
control into the connection
port as shown, making sure to
keep it completely straight.
Insert it as far as it will go.
6. Pull the water tank up
and out of the machine.
14.06.21 12:24
en