Technical Specifications - Tchibo Esperto Pro Original Instructions For Use And Warranty

The coffee is not hot enough.
Especially in the case of espresso, the quantity of coffee is so
small compared to the size of the cup that it cools down quickly.
Preheat the cup.
The coffee is too weak.
Adjust the grinder to a finer setting. If necessary, press the
Intense + button before pressing the beverage button in order
to make the coffee stronger.
The coffee flows slowly out of the coffee spout.
Adjust the grinder to a coarser setting.
The machine takes an unusually long amount of time to heat
up. The coffee or hot water is only being dispensed in small
amounts.
en
The machine needs to be descaled even if the "Descale" symbol
is not lit up. Proceed as described in the section titled "Descaling".
The milk froth consistency is not satisfactory..
Check that all parts of the milk system are correctly assembled
(see chapter "Cleaning", section "Cleaning the milk system").
Turn the milk froth rotary control clockwise or anti-clockwise
to change the milk froth consistency (see chapter "Preparing
beverages with milk", section "Adjusting the milk froth
consistency").
106466 en Esperto_Pro_v5.indd 72

Technical specifications

Product number: 393 500
Mains voltage: 220-240 V ~ 50-60 Hz
Power: 1235-1470 watts
Power consumption
when turned off: 0.5 watts
Protection class: I
Pump pressure: 19 bar
Sound pressure level: <70dB(A)
Automatic switch-off: after 10, 20, 30 or 120 minutes
Preset brew quantities: Espresso approx. 40 ml
Caffè Crema approx. 125 ml
Cappuccino (approx. 40 ml Espresso,
approx. 90 ml milk)
Frothed milk approx. 130 ml
Container for coffee grounds: approx. 10 portions
Ambient temperature: +10 to +40 °C
Made exclusively for: Tchibo GmbH, Überseering 18,
22297 Hamburg, Germany
In the course of product improvement, we reserve the right
to make technical and optical modifications to the product.
72
14.06.21 12:25