First-Time Use (Initial Operation) - Tchibo 280997 Instructions For Use Manual

MAX

First-time use (Initial operation)

1. Setting up the machine
2. Filling the tank with water
3. Pushing down the lever
11 First-time use (Initial operation)
Place the machine on a solid, level surface that is
water- and heat-resistant.
Check that the used capsule container is pushed in as
far as it will go and that the drip grid is in place.
Fill the water tank with fresh, cold tap water or drinking
water up to the MAX mark:
- Either pour the water into the water tank through
the hinged opening or
- pull the water tank upwards at an angle to remove it
and then fill it with water. When reinserting it, press
the water tank down slightly to ensure that the
valve in the base connects with the casing.
The lever must be down. If necessary, push it down.