Tchibo Esperto Pro Original Instructions For Use And Warranty page 53

WARNING
risk of scalds/burns
Hot water, hot coffee or hot milk froth from the coffee/milk spout
can cause burns.
• Do not touch the spout during or immediately after use.
Avoid contact with the liquid being dispensed from the spout.
Default settings upon purchasing the machine:
Cappucino froth approx. 90 ml
espresso approx. 40 ml
We recommend that you always rinse the milk system immediately
after preparing beverages with milk. See section "Rinsing the milk
system".
Tip: You can control the strength of the beverage by adjusting the amount
of milk froth or the amount of beverage. Learn more about how to
do this in the chapter titled "Adjusting the amount of the beverage".
Frothing milk
106466 en Esperto_Pro_v5.indd 53
(depending on the position of the rotary control)
1. Push the coffee/milk spout
upwards as far as it will go
and remove the drip tray.
2. Place a tall glass underneath
the coffee/milk spout.
,
Cancelling the heating up process
Stopping the frothing process early
WARNING
risk of scalds/burns
Hot water, hot coffee or hot milk froth from the coffee or milk spout
can cause burns.
• Do not touch the coffee or milk spout during or immediately after use.
Avoid coming into contact with the beverage coming out of the spout.
53
3. Press the Froth button briefly
once.
The Froth button lights up
and the heating up process
for the milk frothing starts.
The frothing process starts
and stops automatically.
A beep sounds at the start and
end of the frothing process.
Press the Froth button
m
again during the heating up
process.
Press the Froth button
m
again during the frothing
process.
14.06.21 12:24
en