Advertisement
ASSEMBLY INSTRUCTIONS CONTINUED
Step B: Attach the Handrail
步驟 B:用螺絲(114),華司
(59) to the Seat Sliding Base
(5)(112),袋帽(110)將扶手(59)與
with Bolts (114), Washers (5),
座墊滑動件組立,同時用十字開
(112), and Acorn Nuts (110).
口扳手(117)與 6mm 內六角扳手
Then tighten the bolts with
(118)將螺絲鎖緊.
Open Spanner (117) and 6mm
Allen Wrench (118).
Step C: Turn the Grip (93) of
步驟 C:先將座墊滑動座(51)上調
the Seat Sliding Base (51) in
節把手(93)按圖箭頭方向朝上
the direction shown in the
扳,然後將座墊滑動座按鋁管
drawing to the right, slide the
(84)方向滑入鋁管槽中,松開調
Seat Sliding Base onto the
節把手就可將座墊滑動座卡住.
Aluminous Tube (84) and then
release the Grip.
步驟 D:1.用螺絲(91)將塑膠墊片
Step D: 1.Attach the Spacers
(90)組到鋁管(84)上,用 4mm 內
(90) to the Aluminous Tube
六角扳手(116)將螺絲擰緊;
(84) with Bolts (91) and 4mm
2.將手握心跳線後架段(50)與手
Allen Wrench (116).
握心跳線把手段(63)對接.
2. Connect the Hand Pulse
Wires (50), (63) between the
Rear Frame and the Handrail.
R6 RECUMBENT CYCLE
13
Advertisement
