Quectel EG915U-EU Manual page 15

Network Indication
AT Commands
Antenna Interface
Transmitting Power
LTE Features
GSM Features
Internet Protocol Features
Firmware Upgrade
Temperature Range
RoHS
2
Within operating temperature range, the module is 3GPP compliant.
3
Within extended operating temperature range, proper mounting, heating sinks and active cooling may
be required to make certain functions of the module such as voice, SMS, data transmission to be realized.
Only one or more parameters like Pout might reduce in their value and exceed the specified tolerances.
When the temperature returns to normal operating temperature levels, the module will meet 3GPP
specifications again.
EG915U-EU_Hardware_Design
Auxiliary UART
NET_STATUS to indicate network connectivity status.
Compliant with 3GPP TS 27.007, 27.005 and Quectel
enhanced AT commands.
⚫
ANT_MAIN
⚫
Bluetooth and Wi-Fi Scan antenna interface
(ANT_BT/WIFI_SCAN)
⚫ 50 Ω impedance.
⚫
GSM850/EGSM900：Class 4 (33 dBm ± 2 dB)
⚫
DCS1800/PCS1900：Class 1 (30 dBm ± 2 dB)
⚫
LTE-FDD：Class 3 (23 dBm ± 2 dB)
⚫
DCS1800: Class 1 (30 dBm ± 2 dB)
⚫
Supports up to non-CA Cat 1 FDD
⚫
Supports 1.4/3/5/10/15/20 MHz RF bandwidth
⚫
Supports uplink QPSK, 16-QAM
⚫
Supports downlink QPSK, 16-QAM and 64-QAM
⚫
FDD: Max 10 Mbps (DL) / 5 Mbps (UL)
GPRS:
⚫
Supports GPRS multi-slot class 12
⚫
Coding scheme: CS 1-4
Max 85.6 Kbps (DL)/ 85.6 Kbps (UL)
⚫
Supports TCP/UDP/PPP/NTP/NITZ/FTP/HTTP/PING
/CMUX/HTTPS/FTPS/SSL/FILE/MQTT/MMS protoco
ls.
⚫
Supports the protocols PAP (Password Authentication
Protocol) and CHAP (Challenge Handshake
Authentication Protocol).
Use USB interface or FOTA to upgrade.
⚫
Operating temperature range: -35 ° C to +75 ° C
⚫
Extended operating temperature range: -40 ° C to
3
+85 ° C
⚫
Storage temperature range: -40 ° C to +95 ° C
All hardware components are fully compliant with EU
RoHS directive.
LTE Standard Module Series
2
14 / 81