System at a Glance
Knob Function Indicators
Icons to the right of the bar indicate available knob functions. Indications include,
but are not limited to:
Map Active
Available functions:
•
Map zoom
•
Set knob focus to COM
standby frequency
Dual Concentric Knob Shortcuts
GTN 650Xi/750Xi
On some dual GTN Xi installations, more complex knob functions allow you to
tune radio frequencies on both units from a single navigator. For more about the
remote radio control feature, read Remote Radio Control in section 2.
1-16
Home Page Active
Available functions:
•
Multiple pane scrolling
(GTN 650Xi Series only)
•
Set knob focus to COM
standby frequency
For convenience, a three-way toggle function allows you to
access radio controls quickly via knob push. A cyan border
indicates changes in knob focus. This shortcut is useful when
transitioning through the different control modes.
Customization options allow you to set knob functionality
according to preference. By default:
•
Pushing once enables standby COM frequency tuning.
•
Pushing twice enables standby NAV frequency tuning.
•
Pushing again returns to page navigation mode.
Pilot's Guide
Flight Plan Active
Available functions:
•
Flight plan scrolling
•
Set knob focus to COM
standby frequency
190-02327-03 Rev. C