Autopilot Outputs - Garmin GTN 650Xi Series Pilot's Manual

Navigation

Autopilot Outputs

CAUTION
Engage the autopilot heading mode and set the heading bug appropriately to use
the autopilot on heading legs using the autopilot's NAV, GPSS, or APR mode. Not all
autopilots follow guidance on these leg types, Some revert to a roll only or wings
level mode.
FEATURE REQUIREMENTS
•
Availability dependent upon configuration
FEATURE LIMITATIONS
•
Applicable to King KAP 140 and KFC 225 autopilots
Outputs for the King KAP 10/KFC 225 autopilot units require
manual activation.
APR Guidance Advisory, GTN 650Xi
Once enabled, the unit provides guidance information consistent with what the
autopilot expects (i.e., angular CDI scaling and glideslope capture for LPV or other
vertically guided GPS approaches).
ENABLE AUTOPILOT OUTPUTS
1. Acknowledge the advisory message.
2. Tap Enable APR Output.
3. Follow the unit provided guidance.
3-144 Pilot's Guide
If configured, this
function prompts
you to enable
autopilot outputs
during the
approach
procedure.
190-02327-03 Rev. C