Direct To Activation - Garmin GTN 650Xi Series Pilot's Manual

Navigation
FPL & NRST APT
FPL and NRST APT tabs provide a list of selectable identifiers. These tabs have a
uniform layout.
Lists all waypoints contained in
the active flight plan.

Direct To Activation

3-112
Activating a direct course establishes a point-to-point line
from the aircraft's present position to the selected destination.
The unit provides course guidance until you remove the
direct-to waypoint, or replace it with a new direct course
or flight plan.
For convenience, you may activate a direct course using the
inner control knob.
After selecting a waypoint, push the knob to activate the
direct course.
The window closes and Map opens to show the active leg.
Pilot's Guide
Lists up to 25 waypoints within
a 200 nm radius. The closest
airport appears at the top of
the list.
190-02327-03 Rev. C