Planning
RAIM Prediction
NOTE
RAIM availability prediction is for use in areas where WAAS coverage is not available. It
is not required in areas where WAAS coverage is available.
FEATURE REQUIREMENTS
•
Active flight plan or off-route direct-to waypoint (arrival date and time)
FEATURE LIMITATIONS
FAA's TSO requirements for non-precision approaches specify significantly greater satellite
coverage than is required during other phases of flight. As a result, RAIM may not be available
for all approaches.
RAIM prediction results are valid for up to 90 days from the current date. Arrival dates beyond
90 days, or in the past, may not provide accurate results.
This feature predicts the availability of fault detection integrity. It cannot predict the availability
of LPV or L/VNAV approaches.
Use a non-GPS based approach when RAIM is not available. To determine WAAS
availability, including for LPV approaches, visit the FAA's NOTAM service.
WHERE TO FIND IT
Home
Utilities
RAIM Prediction
RAIM Features
•
Automatically monitors RAIM during approach operations and warns when
RAIM is not available
•
Near 100% availability in Oceanic, En route, and Terminal phases of flight
•
Waypoint Identifier, Arrival Date, and Arrival Time setup keys
•
Compute RAIM key
4-18
Determine GPS coverage availability for the current location
or a specified waypoint at any time and date. RAIM performs
checks to ensure that the navigator has adequate satellite
geometry during flight.
This feature can help you plan for a pending
flight by confirming GPS operation before
an approach.
Pilot's Guide
190-02327-03 Rev. C