Search and Rescue Patterns
SAR Pattern Options
SAR Pattern
Initial Track
Initial Turn
Direction
Leg Length
Track Spacing
Leg Count
Load Pattern
Load Pattern &
Activate
Preview
190-02327-03 Rev. C
Create a search and rescue pattern for any off-route course.
Tapping Load SAR displays options for defining a search and
rescue pattern for the selected waypoint.
Select a pattern from the list of available types.
Specify an initial track angle.
Select between Left or Right.
Specify the leg length.
Specify the track spacing distance.
Specify the number of legs.
Accept the specified pattern and return to the previous
window.
Accept and activate the specified pattern.
View the defined SAR pattern as it will appear on Map.
Available on GTN 650Xi Series units only.
The controls on this page allow you to:
•
Select a pattern type.
•
Specify an initial track angle and
spacing distance.
•
Select the turn direction.
•
Specify the number of legs.
•
Load the specified pattern after
the selected waypoint.
•
Load and immediately activate the
specified pattern.
Pilot's Guide
Navigation
3-101