Navigation
Approaches
Loading an Approach into Flight Plan
•
Always check the runway, transition, and all waypoints
•
Flight plans allow only one approach procedure at a time
•
You may load an alternate approach during a missed approach procedure
(flight plan retains all missed approaches)
•
Loading an approach when one is already present will replace the existing entry
•
Loading and not activating an approach does not remove the approach airport
from the flight plan
•
Selecting an approach, transition waypoint, and runway defines the route
PAGE SPECIFIC CONTROLS
Load Approach: Loads approach procedure into the active flight plan.
Load Approach & Activate: Loads approach procedure into the active flight plan
and activates the approach.
Channel/ID: Loads an SBAS approach based on the specified channel.
SELECT AN APPROACH
From the Home page:
1. Tap PROC > Approach.
2. Confirm the selected airport. If necessary, tap Airport and choose an airport
using the provided search options.
3. Tap Approach and select an approach from the list.
4. Tap Transition and select a transition.
5. Tap Load Approach. The Active FPL page opens.
6. Scroll the flight plan to view all approach waypoints.
To change the approach:
Tap the existing flight plan approach and select a different one.
3-126
Pilot's Guide
190-02327-03 Rev. C