Garmin GTN 650Xi Series Pilot's Manual page 296

Planning
GTN 650Xi SERIES
GTN 750Xi SERIES
Trip data calculates automatically upon entry. Statistics for the selected leg or route
display on the lower half of the page.
COMPUTE TRIP STATISTICS
1. Select a trip planning mode.
2. Define a leg or route.
•
If "Flight Plan" is set, select the flight plan and leg. Selecting the active
flight plan sets the starting waypoint at the aircraft's current position.
•
If "Point to Point" is set, select From and To waypoints, or use the
aircraft's current position as the From waypoint.
3. Specify the departure date and time.
4. Specify ground speed or elect to use sensor data.
5. Tap Compute Data (GTN 650Xi Series only).
6. Tap Next or Prev to view statistics for other legs in the flight plan (if applicable).
4-10
To calculate trip data, enter all required input values and then
tap Compute Data.
Pilot's Guide
Statistics for the selected leg or
route display on a dedicated
data page.
To return to the data entry
page, tap Edit Input Data.
190-02327-03 Rev. C