RH Teen KENLIE UPHOLSTERED BED FULL Assembly Instructions

KENLIE UPHOLSTERED BED FULL & QUEEN - ASSEMBLY INSTRUCTIONS

PARTS INCLUDED

A [ 1 ] HEADBOARD
B [ 2 ] SIDE RAIL
C [ 1 ] FOOTBOARD
D [ 4 ] SLAT
E [ 2 ] PLATFORM
F [ 4 ] CENTER FOOT ( WITH ADJUSTABLE GLIDE )

TOOLS NEEDED

Phillps-head screwdriver (not included)
ASSEMBLY IN STRUCTION S

Bed must be assembled by at least two people.

Please read instructions carefully before assembling bed.

Use the above parts and hardware list to identify each component.

Keep all packing materials until assembly is complete to avoid loss of smaller parts
1. Screw the Allen Head Bolt ( 2) to the Headboard ( A ), then stand the Headboard ( A ) upright
and attach Side Rails ( B ), as shown in Diagram I.
2. Repeat above procedure to attach the Footboard ( C ), then tighten all Allen Head Bolts ( 2 )
with Allen Key ( 1 ).
3. Attach the Center Foot ( F ) to the Slat ( D ), as shown in Diagram II.
4. Place the Slats ( D ) on the top of the Side Rail's side slats and fasten using Screw ( 3 ), as shown in
Diagram III.
5. Lay the Platform Panel ( E ) on the top of the slats (D), then screw with screw ( 4 ), as shown in Diagram IV.
NO. NO. ITEM ITEM
1
2
3
4
1 of 2
DESCRIPTION DESCRIPTION
Screw(4cm)
Screw(3cm)
QTY QTY
1 pc
12 pcs
8 pcs
16 pcs